Metal Shell 1500 - 2, 3 and 4 contacts
Mechanically protected bulkhead and flange interfaces in three shell formats. The source describes stainless-steel housings with integral locking-sleeve threads.
Specify this product ↓
Technical values describe the referenced SubConn configuration. DepthLink supply options, final part numbers, dimensions, ratings and mating compatibility require confirmation with your quotation. Pressure-test values are not automatically working-depth ratings.
Applications
- Flange-mounted equipment
- ROV systems
- Instrument housings and slip-ring assemblies
Configuration notes
1500, 2000 and 2400 are shell designations, not depth ratings. Match the exact contact configuration and compatible inline connector.
Electrical & environmental limits
| Voltage rating | 300 V DC/AC rms |
|---|---|
| 2, 3 and 4 contacts current rating | 10 A per contact (max 20 A per connector) |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face) |
Materials, cables & terminations
| Connector body | Chloroprene rubber |
|---|---|
| Connector housing | Stainless steel AISI 316 (other materials on request) |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| Location pin | Stainless steel AISI 303 |
| Locking sleeves | ABS or stainless steel |
| Snap rings | Stainless steel AISI 302 |
| 2, 3 and 4 contact bulkhead leads (1 ft, 30 cm) | 20 AWG, 0.52 mm2 coloured PTFE |
Wiring & contact references
Contact numbering and wire colours must be checked against the approved drawing for the supplied part.
Leads colour code
- 1: Black
- 2: White
- 3: Red
- 4: Green
Mechanical interface & final part identification
Record your required mounting dimensions, thread, cable exit and mating reference in the specification brief below. An approved dimensioned drawing and final supply part number will be confirmed with the quotation. A fabrication or mating drawing is not yet available for this DepthLink alternative.
Metal Shell 1500 - 2, 3 and 4 contacts
Send your enquiry using our contact form or email our team. We can help with product selection, custom configurations, pricing and lead times.