DepthLink
← Back to series
DEPTHLINK / PRODUCT SPECIFICATION

Micro Circular - 21 Contacts

Compact circular interfaces with standard and double O-ring bulkhead options. Contact count and cable construction determine the appropriate configuration.

Specify this product ↓
Micro Circular - 21 Contacts family reference
Family reference image; exact configuration may differ.
Reference specification · subject to technical confirmation

Technical values describe the referenced SubConn configuration. DepthLink supply options, final part numbers, dimensions, ratings and mating compatibility require confirmation with your quotation. Pressure-test values are not automatically working-depth ratings.

Applications

  • Compact instruments
  • ROV and survey systems
  • Camera and sensor connections

Configuration notes

Standard 2–4 contact versions are rated 10 A/contact; G2 2–4 contact versions are rated 5 A/contact. The single-contact page lists only an open-face pressure-test value.

Electrical & environmental limits

Electrical & environmental limits
Voltage rating300 V DC/AC rms
Current rating5 A per contact (max 40 A per connector)
Insulation resistance> 200 MΩ
Contact resistance< 0.01 Ω
Wet matings> 500
Temperature rating (water)- 4 to 60˚C, 25 to 140˚F
Temperature rating (air)- 40 to 60˚C, - 40 to 140˚F
Storage temperature rating- 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face)
Depth rating PEEK300 bar, 4,350 psi

Materials, cables & terminations

Materials, cables & terminations
Connector bodyChloroprene rubber
Bulkhead bodyBrass, stainless steel, titanium, anodised aluminium or PEEK
ContactsFemale sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper
O-ringsNitrile
Locking sleevesPOM or stainless steel
Snap ringsStainless steel AISI 302
Inline cable (2 ft, 60 cm)20 AWG, 0.52 mm2 PUR
Bulkhead and PBOF leads (1 ft, 30 cm)20 AWG, 0.52 mm2 white tagged PTFE
OM leads (3", 7 cm)20 AWG, 0.52 mm2 white tagged PTFE

Wiring & contact references

Contact numbering and wire colours must be checked against the approved drawing for the supplied part.

Inline cable colour code

  • 1: Grey
  • 2: Purple
  • 3: Blue
  • 4: Green
  • 5: Yellow
  • 6: Orange
  • 7: White/black
  • 8: White
  • 9: White/brown
  • 10: White/red
  • 11: White/orange
  • 12: White/yellow
  • 13: White/green
  • 14: White/blue
  • 15: White/purple
  • 16: White/grey
  • 17: White/brown/black
  • 18: White/red/black
  • 19: White/orange/black
  • 20: White/yellow/black
  • 21: White/green/black

Mechanical interface & final part identification

Record your required mounting dimensions, thread, cable exit and mating reference in the specification brief below. An approved dimensioned drawing and final supply part number will be confirmed with the quotation. A fabrication or mating drawing is not yet available for this DepthLink alternative.

Micro Circular - 21 Contacts

Send your enquiry using our contact form or email our team. We can help with product selection, custom configurations, pricing and lead times.