HF Coax - 50 ohm Coax/Electric
Coaxial signal connections offered at 50 or 75 Ω, either coax-only or with six additional electrical contacts.
Specify this product ↓
Technical values describe the referenced SubConn configuration. DepthLink supply options, final part numbers, dimensions, ratings and mating compatibility require confirmation with your quotation. Pressure-test values are not automatically working-depth ratings.
Applications
- Video links
- Telemetry
- RF and antenna interfaces
Configuration notes
Not suitable for open-face pressure or waterblock applications. Locking sleeves are required. Published attenuation describes a 10 m cable assembly including two bulkheads, not the connector alone. Minimum inline cable bend radius: 100 mm; keep grease off the coax interface.
Electrical & environmental limits
| Voltage rating on electric contacts | 300 V DC/AC rms |
|---|---|
| Current rating on electric contacts | 5 A per contact (max 20 A per connector) |
| Voltage rating on coax | 800 V, max nominal voltage |
| Frequency* | 0.3 GHz / 0.6 GHz / 0.9 GHz / 1.2 GHz / 1.5 GHz / 1.8 GHz / 2.1 GHz / 2.4 GHz / 2.7 GHz / 3.0 GHz |
| Attenuation* | 5.0 dB / 7.7 dB / 9.9 dB / 11.6 dB / 13.4 dB / 15.3 dB / 17.3 dB / 19.3 dB / 21 dB / 22.5 dB |
| Recommended max frequency | 3.0 GHz |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (mated) |
Materials, cables & terminations
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel, titanium or anodised aluminium |
| Bulkhead body (RA) | Brass, stainless steel, titanium or anodised aluminium |
| Power contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| Coax contacts | Gold plated contacts |
| O-rings | Nitrile |
| Locking sleeves | POM or stainless steel |
| Locking sleeves (RA) | RADLSA-M (black POM) |
| Snap rings | Stainless steel AISI 302 |
| Inline cable (2 ft, 60 cm) | RG58 coax and 6 x 20 AWG, 0.52 mm2 conductors |
| Coax and 6-contact bulkhead leads (3.3 ft, 100 cm) | RG316 coax and 6 x 20 AWG, 0.52 mm2 coloured PTFE |
Wiring & contact references
Contact numbering and wire colours must be checked against the approved drawing for the supplied part.
Inline cable colour code
- 1: Black
- 2: White
- 3: Red
- 4: Green
- 5: Orange
- 6: Blue
Mechanical interface & final part identification
Record your required mounting dimensions, thread, cable exit and mating reference in the specification brief below. An approved dimensioned drawing and final supply part number will be confirmed with the quotation. A fabrication or mating drawing is not yet available for this DepthLink alternative.
HF Coax - 50 ohm Coax/Electric
Send your enquiry using our contact form or email our team. We can help with product selection, custom configurations, pricing and lead times.