Micro Low Profile - 3 contacts
A smaller low-profile format for tightly packaged underwater sensors and instruments.
Specify this product ↓
Technical values describe the referenced SubConn configuration. DepthLink supply options, final part numbers, dimensions, ratings and mating compatibility require confirmation with your quotation. Pressure-test values are not automatically working-depth ratings.
Applications
- Small sensor packages
- Compact sonar equipment
- Low-drag assemblies
Configuration notes
The 7/9-contact page gives an 800 bar qualified pressure-test value without stating the mating condition in that row. Confirm the applicable condition before specifying.
Electrical & environmental limits
| Voltage rating | 300 V DC/AC rms |
|---|---|
| Current rating | 5 A per contact (max 10 A per connector) |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 1,400 bar, 20,300 psi (mated) 800 bar, 11,600 psi (open face) |
| Depth rating PEEK | 300 bar, 4,350 psi |
Materials, cables & terminations
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass or stainless steel |
| Contacts | Female sockets in gold plated brass UNS - C36000 Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking strap | Chloroprene rubber |
| Inline cable (2 ft, 60 cm) | 20 AWG, 0.52 mm2 synthetic rubber |
| Bulkhead leads (1 ft, 30 cm) | 20 AWG, 0.52 mm2 coloured PTFE |
Wiring & contact references
Contact numbering and wire colours must be checked against the approved drawing for the supplied part.
Inline cable colour code
- 1: Black
- 2: White
- 3: Green
Mechanical interface & final part identification
Record your required mounting dimensions, thread, cable exit and mating reference in the specification brief below. An approved dimensioned drawing and final supply part number will be confirmed with the quotation. A fabrication or mating drawing is not yet available for this DepthLink alternative.
Micro Low Profile - 3 contacts
Send your enquiry using our contact form or email our team. We can help with product selection, custom configurations, pricing and lead times.