Micro Low Profile - 7 and 9 contacts
A smaller low-profile format for tightly packaged underwater sensors and instruments.
Specify this product ↓
Technical values describe the referenced SubConn configuration. DepthLink supply options, final part numbers, dimensions, ratings and mating compatibility require confirmation with your quotation. Pressure-test values are not automatically working-depth ratings.
Applications
- Small sensor packages
- Compact sonar equipment
- Low-drag assemblies
Configuration notes
The 7/9-contact page gives an 800 bar qualified pressure-test value without stating the mating condition in that row. Confirm the applicable condition before specifying.
Electrical & environmental limits
| Voltage rating | 300 V DC/AC rms |
|---|---|
| Current rating | 5 A per contact (max 20 A per connector) |
| Insulation resistance | > 200 Mohm |
| Contact resistance | < 0.01 ohm |
| Wet matings | > 500 (open face rated) |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 800 bar, 11,600 psi |
| Depth rating PEEK | 300 bar, 4,350 psi |
Materials, cables & terminations
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel, titanium, anodised aluminium or PEEK |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male pins in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking strap | Chloroprene rubber |
| Inline cable (2 ft, 60 cm) | 20 AWG, 0.52 mm2 synthetic rubber |
| Bulkhead leads (1 ft, 30 cm) | 20 AWG, 0.52 mm2 coloured PTFE |
| OM leads (3", 7 cm) | 20 AWG, 0.52 mm2 coloured PTFE |
Wiring & contact references
Contact numbering and wire colours must be checked against the approved drawing for the supplied part.
Inline cable colour code
- 1: Black
- 2: White
- 3: Red
- 4: Green
- 5: Orange
- 6: Blue
- 7: White/black
- 8: Red/black*
- 9: Green/black
- 10: Orange/black**
- * Micro 7 contacts connector uses an 8 conductor cable (only 7 conductors are used)
- ** Micro 9 contacts connector uses a 10 conductor cable (only 9 conductors are used)
Mechanical interface & final part identification
Record your required mounting dimensions, thread, cable exit and mating reference in the specification brief below. An approved dimensioned drawing and final supply part number will be confirmed with the quotation. A fabrication or mating drawing is not yet available for this DepthLink alternative.
Micro Low Profile - 7 and 9 contacts
Send your enquiry using our contact form or email our team. We can help with product selection, custom configurations, pricing and lead times.