Nano - 6 contacts
A miniature titanium connection for space- and weight-sensitive equipment, using a six-contact layout and a short-travel locking sleeve.
Specify this product ↓
Technical values describe the referenced SubConn configuration. DepthLink supply options, final part numbers, dimensions, ratings and mating compatibility require confirmation with your quotation. Pressure-test values are not automatically working-depth ratings.
Applications
- Small instruments and sensors
- AUV equipment
- Signal and low-power connections
Configuration notes
The family description includes straight and right-angle options and a 2.5-turn locking sleeve. The detailed source has inconsistent Celsius/Fahrenheit storage-temperature figures; obtain a confirmed storage limit before use.
Electrical & environmental limits
| Voltage rating | 300 V DC/AC rms |
|---|---|
| Contacts current rating | 3 A per contact (max 10 A per connector) |
| Insulation resistance | 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet/splash matings | >500 |
| Temperature rating (water) | -4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | -40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | Manufacturer confirmation required: source Celsius/Fahrenheit values conflict. |
| Qualified pressure tested | 700 bar (open face) |
| Open face rated | 700 bar |
Materials, cables & terminations
| Connector body | Chloroprene rubber, Titanium |
|---|---|
| Bulkhead body | Titanium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves (NAT6F) | Anodised titanium |
| Locking sleeves (NIL6) | POM |
| Bulkhead leads (12") | 24 AWG, 0,2 mm2 coloured PTFE |
Wiring & contact references
Contact numbering and wire colours must be checked against the approved drawing for the supplied part.
Inline cable colour code
- 1-2: Black/white*
- 3-4: Red/Green*
- 5-6: Orange/Blue*
- * Twisted pairs
Leads colour code
- 1: Black
- 2: White
- 3: Red
- 4: Green
- 5: Orange
- 6: Blue
Mechanical interface & final part identification
Record your required mounting dimensions, thread, cable exit and mating reference in the specification brief below. An approved dimensioned drawing and final supply part number will be confirmed with the quotation. A fabrication or mating drawing is not yet available for this DepthLink alternative.
Nano - 6 contacts
Send your enquiry using our contact form or email our team. We can help with product selection, custom configurations, pricing and lead times.