Interface
Pin count, available space, electrical load and cable termination.
Explore miniature connections for space-sensitive sensing and instrumentation.
Discuss your connection ↗Technical overview ↓
Contact layout, handling access and the installed cable envelope.
Pin count, available space, electrical load and cable termination.
Cable length, end termination, materials and installation conditions.
Required quantity, delivery date, inspection and documentation.
Final specifications, availability and any compatibility with an existing connector are confirmed during quotation.
A miniature titanium connection for space- and weight-sensitive equipment, using a six-contact layout and a short-travel locking sleeve.
The figures below describe the referenced SubConn configurations, not verified DepthLink alternatives. Final supplied specifications and mating compatibility are confirmed with your quotation. Qualified pressure-test values are shown as published and are not automatically working-depth ratings.
Technical information reviewed 19 September 2026The family description includes straight and right-angle options and a 2.5-turn locking sleeve. The detailed source has inconsistent Celsius/Fahrenheit storage-temperature figures; obtain a confirmed storage limit before use.
Expand a group for electrical and environmental limits, construction, wiring. Open the product specification to build your requirements.
| Voltage rating | 300 V DC/AC rms |
|---|---|
| Contacts current rating | 3 A per contact (max 10 A per connector) |
| Insulation resistance | 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet/splash matings | >500 |
| Temperature rating (water) | -4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | -40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | Manufacturer confirmation required: source Celsius/Fahrenheit values conflict. |
| Qualified pressure tested | 700 bar (open face) |
| Open face rated | 700 bar |
| Connector body | Chloroprene rubber, Titanium |
|---|---|
| Bulkhead body | Titanium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves (NAT6F) | Anodised titanium |
| Locking sleeves (NIL6) | POM |
| Bulkhead leads (12") | 24 AWG, 0,2 mm2 coloured PTFE |
Confirm the exact part’s drawing and contact numbering before wiring.
Bring the mating interface, wiring and service conditions into the same specification.
Measure the whole installed connection, including the mating half, cable bend and handling access. Specify the pin functions and electrical duty for the selected contact arrangement. For a switch installation, keep the connector family and the sensor mounting thread as separate selections.
State maximum operating pressure or depth, immersion duration and temperature. Also state whether the connection must be made underwater. Check the exact connector, cable and terminations together; a reference pressure-test figure is not a working-depth rating for a supplied assembly.
Share your current manufacturer and part number. We’ll review a suitable option for your application.

A starting point for general subsea equipment connections.
Explore requirements
Explore compact circular connections for instruments and smaller assemblies.
Explore requirements
Consider a lower-profile connection where installation height is constrained.
Explore requirements
Define a compact connection for closely packaged equipment.
Explore requirements
Explore metal-shell configurations around your mechanical and environmental requirements.
Explore requirements
Specify the connection around your equipment’s power requirements.
Explore requirements
Define the complete signal path for your data connection.
Explore requirements
Discuss coaxial connections as part of a complete cable and equipment interface.
Explore requirementsDefine the connector, cable and termination together.