Interface
Data protocol, speed, cable length, shielding and pin assignment.
Define the complete signal path for your data connection.
Contact us ↗Technical overview ↓
Protocol, data rate, shielding and cable length.
Data protocol, speed, cable length, shielding and pin assignment.
Cable length, end termination, materials and installation conditions.
Required quantity, delivery date, inspection and documentation.
Final specifications, availability and any compatibility with an existing connector are confirmed during quotation.
Gigabit data interfaces in circular, micro-circular, low-profile and metal-shell formats, including combined power/data versions.
The figures below describe the referenced SubConn configurations, not verified DepthLink alternatives. Final supplied specifications and mating compatibility are confirmed with your quotation. Qualified pressure-test values are shown as published and are not automatically working-depth ratings.
Technical information reviewed 19 September 2026Published cable reach is configuration-specific: 50 m for Micro Circular 9-contact and 75 m for specified Circular/Low Profile variants. Where no length is stated, 1 Gbit/s is not a guaranteed cable-distance claim. RJ45 termination also depends on cable construction.
Expand a group for electrical and environmental limits, construction, wiring. Open the product specification to build your requirements.
| Voltage rating | 250 V DC/AC rms |
|---|---|
| Data rate | 1 Gbit/s (up to 50 m) |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Depth rating PEEK | 300 bar, 4,350 psi |
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel, titanium, anodised aluminium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves | ABS or stainless steel |
| Snap rings | Stainless steel AISI 302 |
| Inline cable (3.3 ft, 100 cm) | PUR cable D/P4TP24#-A |
| Bulkhead and PBOF leads (3.3 ft, 100 cm) | CAT 5E patch cable incl. Screened RJ 45 connector incl. on bulkhead (not installed) |
| OM leads (3") , 7 cm | CAT 5E patch cable |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 250 V DC/AC rms |
|---|---|
| Data rate | 1 Gbit/s (up to 75 m) |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Depth rating PEEK | 300 bar, 4,350 psi |
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel, titanium, anodised aluminium or PEEK |
| Bulkhead body (RA) | Brass, stainless steel, titanium or anodised aluminium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves | POM or stainless steel |
| Locking sleeves (RA) | RADLSA-M (black POM) |
| Snap rings | Stainless steel AISI 302 |
| Inline cable (3.3 ft, 100 cm) | 4 pair 24 AWG, 0.20 mm2 PUR |
| Bulkhead and PBOF leads (3.3 ft, 100 cm) | CAT 5E patch cable incl., RJ 45 connector incl. on bulkhead (not installed) |
| OM leads (3") , 7 cm | CAT 5E patch cable |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 600 V DC/AC rms |
|---|---|
| Voltage rating on data wire | 250 V DC/AC rms |
| Current rating on power wire | 4 A per contact (max 16 A per connector) |
| Data rate | 1 Gbit/s (up to 75 m) |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Depth rating PEEK | 300 bar, 4,350 psi |
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel, titanium, anodised aluminium or PEEK |
| Bulkhead body (RA) | Brass, stainless steel, titanium or anodised aluminium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves | POM or stainless steel |
| Locking sleeves (RA) | RADLSA-M (black POM) |
| Snap rings | Stainless steel AISI 302 |
| Inline cable (3.3 ft, 100 cm) | 4 pair 24 AWG, 0.20 mm2 PUR, Power conductors 4 x 18 AWG, 0.82 mm2, Screen: Tinned copper braid |
| Bulkhead and PBOF leads (3.3 ft, 100 cm) | CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 coloured PTFE., RJ 45 connector incl. on bulkhead (not installed) |
| OM leads (3", 7 cm) | CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 coloured PTFE |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 600 V DC/AC rms (13 contacts only) |
|---|---|
| Voltage rating on data wire | 250 V DC/AC rms |
| Current rating on power wire | 4 A per contact (max 16 A per connector) (13 contacts only) |
| Data rate | 1 Gbit/s |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel, titanium, anodised aluminium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves | POM or stainless steel |
| Snap rings | Stainless steel AISI 302 |
| Bulkhead leads (3.3 ft, 100 cm) | CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 coloured PTFE (13 contacts only), incl. RJ 45 connector (not installed) |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 250 V DC/AC rms |
|---|---|
| Data rate | 1 Gbit/s (up to 75 m) |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel, titanium or anodised aluminium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking straps | Chloroprene rubber |
| Inline cable (3.3 ft, 100 cm) | 4 pair 24 AWG, 0.20 mm2 PUR, Screen: Tinned copper braid |
| Bulkhead leads (3.3 ft, 100 cm) | CAT 5E patch cable incl. RJ 45 connector (not installed) |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 600 V DC/AC rms |
|---|---|
| Voltage rating on data wire | 250 V DC/AC rms |
| Current rating on power wire | 4 A per contact (max 16 A per connector) |
| Data rate | 1 Gbit/s (up to 75 m) |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Depth rating PEEK | 300 bar, 4,350 psi |
| Connector body | Chloroprene rubber |
|---|---|
| Bulkhead body | Brass, stainless steel or titanium |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking straps | Chloroprene rubber |
| Inline cable (3.3 ft, 100 cm) | 4 pair 24 AWG, 0.20 mm2 PUR, Power conductors 4 x 18 AWG, 0.82 mm2, Screen: Tinned copper braid |
| Bulkhead leads (3.3 ft, 100 cm) | CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 coloured PTFE, incl. RJ 45 connector (not installed) |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 250 V DC/AC rms |
|---|---|
| Data rate | 1 Gbit/s |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Connector body | Chloroprene rubber |
|---|---|
| Connector housing | Stainless steel AISI 316 (other materials on request) |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Connector leads (3.3 ft, 100 cm) | CAT 5E patch cable incl. Screened RJ 45 connector (not installed) |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 250 V DC/AC rms |
|---|---|
| Data rate | 1 Gbit/s |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Connector body | Chloroprene rubber |
|---|---|
| Connector housing | Stainless steel AISI 316 (other materials on request) |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves | POM or stainless steel |
| Snap rings | Stainless steel AISI 302 |
| Bulkhead leads (3.3 ft, 100 cm) | CAT 5E patch cable incl. RJ 45 connector (not installed) |
Confirm the exact part’s drawing and contact numbering before wiring.
| Voltage rating | 600 V DC/AC rms |
|---|---|
| Voltage rating on data wire | 250 V DC/AC rms |
| Current rating on power wire | 4 A per contact (max 16 A per connector) |
| Data rate | 1 Gbit/s |
| Insulation resistance | > 200 MΩ |
| Contact resistance | < 0.01 Ω |
| Wet matings | > 500 |
| Temperature rating (water) | - 4 to 60˚C, 25 to 140˚F |
| Temperature rating (air) | - 40 to 60˚C, - 40 to 140˚F |
| Storage temperature rating | - 40 to 60˚C, - 40 to 140˚F |
| Qualified pressure tested | 600 bar, 8,700 psi (open face) |
| Connector body | Chloroprene rubber |
|---|---|
| Connector housing | Stainless steel AISI 316 (other materials on request) |
| Contacts | Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper |
| O-rings | Nitrile |
| Locking sleeves | POM or stainless steel |
| Snap rings | Stainless steel AISI 302 |
| Bulkhead leads (3.3 ft, 100 cm) | CAT 5E patch cable, 4 x 20 AWG, 0.52 mm2 coloured PTFE incl. RJ 45 connector (not installed) |
Confirm the exact part’s drawing and contact numbering before wiring.
Share your current manufacturer and part number. We’ll review a suitable option for your application.

A starting point for general subsea equipment connections.
Explore requirements
Explore compact circular connections for instruments and smaller assemblies.
Explore requirements
Consider a lower-profile connection where installation height is constrained.
Explore requirements
Define a compact connection for closely packaged equipment.
Explore requirements
Explore metal-shell configurations around your mechanical and environmental requirements.
Explore requirements
Specify the connection around your equipment’s power requirements.
Explore requirements
Discuss coaxial connections as part of a complete cable and equipment interface.
Explore requirements
Explore miniature connections for space-sensitive sensing and instrumentation.
Explore requirementsDefine the connector, cable and termination together.