Confirm final materials and interfaces for your selected configuration.
SUBSEA ENGINEERING
Underwater Proximity Switch - M12 Thread - Chemical Resistant Cable
Ultra-compact magnetic proximity switch for position feedback on submerged equipment. M12 × 1.0 316L stainless-steel body with integral EPDM cable, resistant to chlorinated water up to 10 ppm and rated for continuous submersion to 50 m (164 ft). Volt-free SPDT contacts switch when the optional MT-01 target magnet comes within 5/8" (16 mm). Target ordered separately.
DEPTH RATING72 PSIApprox. 5 bar · Approx. 50 m seawater
Small footprint. Subsea position feedback.
Our ultra-compact switch platform combines an M12 mounting thread with an integrated Nano subsea connector. Choose it when mounting space and connector clearance are limited. Micro and Nano refer to connector families, independently of the mounting thread.
Contact Form
SPDT changeover
Choose the mounting and connection around the mechanism, then match the electrical and immersion duty.
Fix the switch beside the mechanism and mount the specified target on the moving part. The target passes the sensing face at the position you need to detect.
Target enters the sensing range
The suitable target changes the configured contact state without physically pressing the switch. Confirm the target type, sensing gap and alignment against the exact product drawing.
Connect the position signal
Route the signal through this product’s specified cable and connector arrangement to the control input. Review the contact function, electrical load and pin allocation together.
Check travel and repeatability
Verify indication and reset throughout the installation tolerances. A proximity switch indicates a defined position; it does not measure the entire cylinder stroke.
For this product: Use the approved configuration for Underwater Proximity Switch - M12 Thread - Chemical Resistant Cable. Confirm mounting thread, target, sensing gap, body and connector materials, cable route and operating conditions.
This is a subsea switch configuration. Specify continuous immersion as an operating duty, including external pressure, duration, water temperature and media. The supplied assembly specification defines its limits, including the actuation interface and cable termination.
What should I specify for use in seawater?
Specify the water conditions and the materials of the housing, connector, mounting hardware and target or striker. Material selection is specific to the installation; a corrosion-resistant housing does not establish the suitability of every connected component.
What target does the switch detect?
Select the target and operating gap for this configuration. A proximity switch indicates a defined position; it does not measure the complete travel of an actuator. Use the product drawing to establish the target, approach direction and mounting clearance.
Need help choosing a subsea proximity switch?
Tell us the application, operating depth and quantity, if known. We’ll help with the configuration, price and lead time.
Underwater position feedback, configured for your equipment.
Selecting a subsea proximity switch or submersible position sensor starts with the duty: valve position, actuator travel, gate position or tool engagement. Review the sensing target, mounting, switching load and operating conditions alongside the cable assembly.