DepthLink
DepthLink / cables

Confirm final materials and interfaces for your selected configuration.

SUBSEA ENGINEERING

8-pin Micro Circular subsea cable - Single-ended male

8-pin Micro Circular subsea cable assembly with male to flying leads terminations. Wet-mate connector for underwater connection and disconnection with power isolated. Standard lengths: 2 m, 5 m and 10 m. DL-SSC-MIC8M-xM identifies the range; select the length-specific part number when ordering.

Choose your cable length

LengthPart numberEnquire
2 mDL-SSC-MIC8M-2MEnquire ↗
5 mDL-SSC-MIC8M-5MEnquire ↗
10 mDL-SSC-MIC8M-10MEnquire ↗

Other lengths on request.

SPECIFICATION & SELECTION

Technical specifications.

Review the configuration, operating limits and interfaces together. Our engineering team can help resolve your requirements.

Contact us ↗
Part numberDL-SSC-MIC8M-xM
Number of Pins8
Assembly arrangementMale to flying leads
Standard lengths2 m, 5 m, 10 m
Housing MaterialChloroprene rubber
Connector GenderMale to Pigtails
Depth RatingMated: 1,400 bar / 20,300 psi ¦ Open Face: 800 bar / 11,600 psi / 8,000 m sea water
Operating Temp-40 to 60˚C / -40 to 140˚F
Mating Cycles> 500

Specifications apply to the listed configuration. Include the part reference when requesting a different interface or operating duty.

TECHNICAL DOCUMENTATION

Datasheet & CAD

Drawings & datasheets

Request the datasheet and dimensional drawing for your configuration.

Contact us ↗
Testing & verification

Agree inspection, electrical testing, pressure testing and supporting records as part of your quotation.

OPERATING PRINCIPLE · 8-pin Micro Circular subsea cable - Single-ended male

How this assembly carries the signal between interfaces

  1. Define each end

    Match the connector, contact arrangement and termination at each end to the equipment drawing. The free-lead end must be terminated inside the specified equipment interface.

  2. Route the cable

    Choose length and construction for the installation. Allow the specified bend radius, strain relief and movement without loading the connector or termination.

  3. Connect and verify

    Confirm pin-to-pin allocation, shielding and electrical checks for the finished assembly. Use the approved mating procedure; submersion capability alone does not permit underwater mating.

For this product: Review this assembly’s actual connector interfaces, conductor allocation, cable construction, installation route and complete assembly rating.

PRODUCT + APPLICATION ENGINEERING

Custom underwater cable assemblies, configured for your installation.

Specify the whole connection: single-ended or double-ended subsea cable assemblies, proximity switch leads and custom harness requirements. Cable construction, connector interfaces, length, pin assignment and termination must suit the equipment and operating environment.

Read this product’s operating principle ↗

Explore titanium, Inconel and Monel material options ↗