DepthLink
DepthLink / switches

Confirm final materials and interfaces for your selected configuration.

SUBSEA ENGINEERING

Subsea Proximity Switch - M18 Thread - Micro Connector

Robust stainless steel 316 housing engineered for subsea environments, delivering superior corrosion resistance and durability in high-pressure, saltwater applications. Built to withstand extreme depths and harsh conditions while maintaining structural integrity and reliable performance. Micro circular subsea rated connector provides reliable connectivity in demanding underwater environments. Features dry contact, volt-free contacts with SPDT changeover type configuration. Delivers two outputs—normally open and normally closed—enabling flexible switching logic. Rated to switch up to 1A, suitable for low-power control and signaling…

DEPTH RATING10,000 PSIApprox. 690 bar · Approx. 6,900 m seawater

Why choose this configuration?

Start here when your mounting arrangement calls for an M18 body; confirm the exact thread and connection.

Connector Type
Micro Circular
Contact Form
SPDT changeover
Connector mating
Wet-mateable

Choose the mounting and connection around the mechanism, then match the electrical and immersion duty.

Compare sensing methods ↗
SPECIFICATION & SELECTION

Technical specifications.

Review the configuration, operating limits and interfaces together. Our engineering team can help resolve your requirements.

Contact us ↗
Part numberDL-PS-50M18-1A-MIC3-SS
Housing MaterialStainless Steel 316
Housing ThreadM18x1.0
Thread Length2" / 50 mm
Length to Connector Face3.40" / 86.50 mm
Connector TypeMicro Circular
Connector GenderMale
Number of Pins3
Sensing Range5/8" (16 mm)
Output TypeDry Contacts
Contact FormSPDT changeover
Depth Rating10,000 PSI / 690 bar / 6,900m seawater
Environmental RatingContinuous submersion
Operating Temp -40 to 140˚F / -40 to 60˚C
Power RequirementNo power required
OrientationInline
Connector Body MaterialStainless Steel 316
Max Switching Current @ 24 VDC1A
Operating Frequency250 Hz max.
Shock (11 ms)50 G
Vibration (10-1,000 Hz)20 G
SealingHermetically sealed

Specifications apply to the listed configuration. Include the part reference when requesting a different interface or operating duty.

TECHNICAL DOCUMENTATION

Datasheet & CAD

Compare switches & browse technical files ↗

Magnetic targets

MT-01 Magnetic Target

Use this switch alongside the MT-01 Magnetic Target. Order the target separately.

MT-01 Magnetic TargetPDF download
Drawings & datasheets

Contact us for configuration-specific documentation.

Contact us ↗
Testing & verification

Agree inspection, electrical testing, pressure testing and supporting records as part of your quotation.

TESTED TO

Proven before it goes subsea.

Rated for continuous submersion. Every DepthLink proximity switch is tested at multiple stages of manufacture.

1.5×Depth-pressure proof test
Tested to 1.5× the certified depth pressure rating for the configuration.
100%Production testing
Every switch is tested at multiple manufacturing stages before release.
10⁸Mechanical cycles
Rated to 100 million mechanical operations.
3×10⁶Cycles at maximum load
Rated operations at the maximum specified switching load.

Additional depth testing, witnessed tests and supporting test records can be agreed to your project requirements. Discuss test requirements ↗

OPERATING PRINCIPLE · Subsea Proximity Switch - M18 Thread - Micro Connector

How this switch detects position without contact

  1. Mount at the sensing point

    Fix the switch beside the mechanism and mount the specified target on the moving part. The target passes the sensing face at the position you need to detect.

  2. Target enters the sensing range

    The suitable target changes the configured contact state without physically pressing the switch. Confirm the target type, sensing gap and alignment against the exact product drawing.

  3. Connect the position signal

    Route the signal through this product’s specified cable and connector arrangement to the control input. Review the contact function, electrical load and pin allocation together.

  4. Check travel and repeatability

    Verify indication and reset throughout the installation tolerances. A proximity switch indicates a defined position; it does not measure the entire cylinder stroke.

For this product: Use the approved configuration for Subsea Proximity Switch - M18 Thread - Micro Connector. Confirm mounting thread, target, sensing gap, body and connector materials, cable route and operating conditions.

INSTALLATION & SELECTION

Before you fit the switch.

Can this switch operate continuously underwater?

This is a subsea switch configuration. Specify continuous immersion as an operating duty, including external pressure, duration, water temperature and media. The supplied assembly specification defines its limits, including the actuation interface and cable termination.

What should I specify for use in seawater?

Specify the water conditions and the materials of the housing, connector, mounting hardware and target or striker. Material selection is specific to the installation; a corrosion-resistant housing does not establish the suitability of every connected component.

What target does the switch detect?

Select the target and operating gap for this configuration. A proximity switch indicates a defined position; it does not measure the complete travel of an actuator. Use the product drawing to establish the target, approach direction and mounting clearance.

Need help choosing a subsea proximity switch?

Tell us the application, operating depth and quantity, if known. We’ll help with the configuration, price and lead time.

PRODUCT + APPLICATION ENGINEERING

Underwater position feedback, configured for your equipment.

Selecting a subsea proximity switch or submersible position sensor starts with the duty: valve position, actuator travel, gate position or tool engagement. Review the sensing target, mounting, switching load and operating conditions alongside the cable assembly.

Looking for an underwater limit switch? Compare proximity sensing with end-of-travel switching requirements.

Read this product’s operating principle ↗

Explore titanium, Inconel and Monel material options ↗

Technical drawings & connections

Dimensional drawing for Subsea Proximity Switch - M18 Thread - Micro Connector
Dimensional drawing
Connection diagram for Subsea Proximity Switch - M18 Thread - Micro Connector
Connection diagram
Wiring matrix
PinCable colourFunction
1BlackNormally Closed
2WhiteCommon
3GreenNormally Open